Ableton live 9 lite tutorial

By | June 18, 2019

WhatsApp When talking about Ableton, we tend to focus on Live Suite, with all its bells and whistles. Ableton live 9 lite tutorial that is Live 10 Standard, still well-featured but without some of the extras. Lite is slightly more restricted and only available with authorisation from a third party product purchase, while Intro is available as a full separate purchase, or included with Push. They both latch into the Ableton ecosystem; either one puts you on the upgrade path to fuller editions of Live. Intro features racks and effects of course, but the most critical component as far as Push goes, is Simpler.

How to get the best out of Ableton Live Lite & Intro

ableton live 9 lite tutorial

Clips Samples These Categories are where you can search for the effects and instruments built into Ableton. Underneath this is Places, where you can search your computer for files. The right side of the Browser is where you can navigate to specific files or folders within the category or place you have selected.

The top section of the browser contains a search feature, which allows you to search in the selected folder for a particular sound, instrument, or effect.

Hover over anything in Ableton, and this will tell you what it does. This is extremely helpful, and can be a lifesaver in helping you learn. The bottom pane is the Effect Controls section.

Finally, the remaining panel on the right is the session or arrangement view. This is where you will create and manipulate audio. Before you can make any music, you need to understand the difference between tracks. MIDI devices and tracks are covered comprehensively later on, but for now, think of them as a way of generating a sound, like a keyboard or guitar.

Audio tracks are the opposite of MIDI tracks. These can play and record sounds from other devices such as a microphone or other device , but they cannot generate any sounds on their own. Finally, there are Return Tracks.

These provide a route for processing audio and returning it back. Each track has the same basic structure. The top of the track is known as the Track Title Bar.

You can right-click here to change the name and color of the track. Underneath this are the Clip Slots. Underneath the clip slot is a mini control panel for each track.

Here you can enable or disable the track, adjust settings such as pan or gain, and route audio from or to nearly any other place. The default values are sufficient for now.

Go ahead and delete the two MIDI tracks and one audio track so you are left with one track. Underneath Categories, select Samples. Use the right side of the browser to search for some sounds you like — Ableton comes with lots of samples, and each version Intro, Standard, and Suite comes with a different selection. You can use the cursor or the arrow keys to select a sample, and doing so will play a preview of it. Most of these will be short sounds of people or instruments. If you want something a bit more complex, select Clips from the Categories submenu.

To hear a preview, select Click to Preview from the bottom of the browser. This will now show up as a clip. You can drag multiple clips onto empty clip slots, or drag them over existing clips to replace the old clips with the new ones. Once in the session view, clips have a random color assigned. You can change this by right-clicking and selecting a new color. Press the small triangle next to a clip to play it.

Notice how the interface changes. The triangle turns green, and you get audio meters on this track and the master. Down in the mixer section, try playing around with the various controls. The Track Activator will enable or disable the track.

When disabled, no sound will come out of the track, but it will keep playing — think of this like a mute button. Use the Pan Knob to adjust the pan of the track, or adjust the volume using the Track Volume Slider to the right of the output levels. If you want to stop or start sound, press the spacebar. Go ahead and drag some more clips onto the track.

Once you have more than one clip, try playing another one — what do you notice? There are several things that happen once you trigger a new clip in the same track. The currently playing clip stops, and the new clip starts. Use one of these great sites to learn a little bit more about what makes music what it is. Read More will be useful to you.

If you start a clip in the middle of a bar, Ableton will wait until the start of the bar before playing that clip. This makes music sound better and keeps it in time.

You can change this from the Quantization menu on the top-left settings bar. This menu also lets you change the time signature and tempo. You can create a new track by right clicking in some empty space, and selecting Insert Audio Track or Insert Midi Track.

Once you have more than one track, you can trigger all of the horizontal clips across multiple tracks using a Scene. A scene is a single row of clips whereas a track is a column. Scenes can be found on the right hand side under the Master track, and can be colored, renamed and adjusted just like clips.

Double clicking a clip will open it in the effects controls section at the bottom of the screen. Here you can manipulate the audio sample, as well as fine-tune the sound. You can adjust where the sample starts or stops, as well as the pitch, timing, volume, and much more. For now, there are only a few main points to look at. Underneath the Sample Control, there is a Loop button, which is turned on by default. This means that once a clip is finished playing, it will start again. Looping can be configured on a per-clip basis, so you can have some clips looping, and others only playing once.

The Warp button adjusts the timing of a clip to match the current timing of your project. This can sometimes get confused and muddled up, but there are things you can do to make it more accurate. Finally, one of the most useful actions is the Launch Mode.

This defines how clips play once started. There are four launch modes: The default mode. Clicking a clip will play it. The clip will play for as long as it is held down. Once you release the mouse the clip will stop playing. Click to start. Click to stop. This repeats the clip every x bars — as defined in the quantization menu previously. Launch modes are where your creativity can really come alive. When used with a MIDI controller or keyboard shortcuts, you can get some really creative sounds out of Ableton.

Press the Key button in the top-right. This will turn on or off the Key Map Mode. This is where you can assign keyboard keys to almost any function in Ableton — the most important being triggering clips.

Once in key map mode, simply click an action such as starting a clip , and then press a key. Your new key will appear next to the function you pressed. This lets you play a virtual musical keyboard with your computer keyboard. MIDI devices play a sound when given a command. Double-click an empty clip slot to create a new clip. You need to assign an instrument to the track before any sound will come out. Press the B key to enter draw mode — this will allow you to enter notes.

If you press the Fold button above the virtual keyboard, Ableton will hide all the keys you have not used yet. Open the browser and select Instruments underneath the categories heading. Drag this instrument on top of your track name — this will assign it to the track. Now when you press play, you should have a pleasant piano sound! This instrument contains various effects and settings. Try playing around with settings like Reverb and Bright and see what happens to your sound.

This allows you to assign samples to keys on the keyboard, and is a neat self-contained way to trigger multiple samples. The effects panel will now show the drum rack controls. Each slot is triggered by a note from the musical keyboard.

You can drag samples from the browser into a slot in the drum rack. You have various controls to alter the sample, and if you create a new clip on your drum rack channel, whatever note you play in this clip will trigger the sample you setup on the drum rack — pretty neat!

A MIDI keyboard lets you make music and record clips using a real keyboard, but one that is routed through your track. Want to change your instrument?

Ableton Live Lite Tutorial

Still using Live 9? Check out the Learn Live 9 series. Certified Training. All over the globe, a growing group of trainers and institutions are offering approved Ableton teaching at all skill levels, both for individuals and groups. Training in Seattle: 3 trainers and institutions offer certified training in Seattle. Included with a number of apps and hardware products, Live 10 Lite is a lightweight version of Ableton Live It comes with all of Live’s essential workflows, instruments and effects – everything you need to record songs, create hands-on with your controller, take music made in your apps. Live 9: Playing Software Instruments Tutorial [Note: this lesson and an accompanying Live Set are also installed with Ableton Live and are viewable within the program itself. These lessons can be accessed from Live’s Help View.

VIDEO: Ableton Live 9 Lite Tutorial

Ableton Reference Manual Version 9 information in this manual is accurate. Ableton Ableton, the Ableton Logo, the Live logo are trademarks of Ableton AG. Live is software for creating musical ideas, turning them into finished songs, and even taking them Live & Push manual Check out the Learn Live 9 series.

Also Download Here: Portraiture Serial Number | Http Www Rosettastone Com Product Activation